Difference between revisions of "Config.ini"
Line 37: | Line 37: | ||
=== Fullscreen === | === Fullscreen === | ||
<code>Default: "true"</code> | <code>Default: "true"</code> | ||
+ | |||
Whether the game is fullscreen or not. The game will remember if it was fullscreen or not the last time you ran it (even if you didn't use the video config menu,) and will make it that way again when you run it again. | Whether the game is fullscreen or not. The game will remember if it was fullscreen or not the last time you ran it (even if you didn't use the video config menu,) and will make it that way again when you run it again. | ||
=== Window_Width, Window_Height === | === Window_Width, Window_Height === | ||
<code>Default: Window_Width="1280" Window_Height="720"</code> | <code>Default: Window_Width="1280" Window_Height="720"</code> | ||
+ | |||
When the game is not fullscreen, this is the size that the game was the last time it ran. This size will be restored the next time it's run. | When the game is not fullscreen, this is the size that the game was the last time it ran. This size will be restored the next time it's run. | ||
=== VSync === | === VSync === | ||
<code>Default: "true"</code> | <code>Default: "true"</code> | ||
+ | |||
VSync is used to get rid of vertical tearing. It can cause a performance hit, but that hit will only really affect older machines. It is best left on. | VSync is used to get rid of vertical tearing. It can cause a performance hit, but that hit will only really affect older machines. It is best left on. | ||
=== AntiAliasing === | === AntiAliasing === | ||
<code>Default: "0"</code> | <code>Default: "0"</code> | ||
+ | |||
There are 4 possible values to this: <code>0</code>, <code>2</code>, <code>4</code>, and <code>8</code>. This will smooth out the lines on polygons, like the ones on the pause menu and dialog boxes, but comes at a great performance cost (even on modern machines.) It's best to leave this at 0, unless your device can support it. | There are 4 possible values to this: <code>0</code>, <code>2</code>, <code>4</code>, and <code>8</code>. This will smooth out the lines on polygons, like the ones on the pause menu and dialog boxes, but comes at a great performance cost (even on modern machines.) It's best to leave this at 0, unless your device can support it. | ||
=== Texture_Interpolation === | === Texture_Interpolation === | ||
<code>Default: "true"</code> | <code>Default: "true"</code> | ||
+ | |||
This smooths out the pixels when the game is playing at a resolution that's not a solid multiple of <code>640x360</code>, such as <code>1280x720</code> or <code>1920x1080</code>. If you were playing at, say, <code>1680x1050</code> then the game would be downscaled some from <code>1920x1080</code> and Texture Interpolation will help to smooth out the pixels. Otherwise, you will get a jagged look. | This smooths out the pixels when the game is playing at a resolution that's not a solid multiple of <code>640x360</code>, such as <code>1280x720</code> or <code>1920x1080</code>. If you were playing at, say, <code>1680x1050</code> then the game would be downscaled some from <code>1920x1080</code> and Texture Interpolation will help to smooth out the pixels. Otherwise, you will get a jagged look. | ||
Line 59: | Line 64: | ||
=== Upscale_Method === | === Upscale_Method === | ||
<code>Default: "1"</code> | <code>Default: "1"</code> | ||
+ | |||
There are two possible values for this, which are <code>0</code> and <code>1</code>. | There are two possible values for this, which are <code>0</code> and <code>1</code>. | ||
Line 69: | Line 75: | ||
=== AppSurfaceUpscale === | === AppSurfaceUpscale === | ||
<code>Default: "true"</code> | <code>Default: "true"</code> | ||
+ | |||
+ | Although [[Shield Cat]] has a resolution of <code>640x360</code>, it will actually render at your monitor's native resolution. For instance, if your monitor is <code>1920x1080</code>, then the game will render at that resolution. All high-res assets, polygons, shaders, and whatnot will be rendered at your screen's native resolution. | ||
+ | |||
+ | However, this can cause negative performance on older machines. In this case, you can disable AppSurfaceUpscale. The game will render all assets, polygons, shaders, and whatnot at <code>640x360</code> and then upscale the final result to fit the display. This can have an incredible impact on older machines to make the game run at full speed instead of very slowly. <b>However</b>, if <code>Texture_Interpolation</code> is on, and <code>AppSurfaceUpscale</code> is off, then <b>the screen will be blurry.</b> You must turn BOTH of these settings off to correct this issue. | ||
== [Input] == | == [Input] == |
Revision as of 02:59, 11 September 2019
The config.ini
file contains general configuration info for Shield Cat. It can be found in the directories specified in the Installation Instructions, depending on which platform you're playing on.
Here is a table of the possible options, with their defaults specified. Please note that if a key/value pair isn't included in the ini file, then the game will use an internal default value which matches the ones specified below.
[Video]
Fullscreen="true" Window_Width="1280" Window_Height="720" VSync="true" AntiAliasing="0" Texture_Interpolation="true" Upscale_Method="1" AppSurfaceUpscale="true" |
[Input]
AllowTouchInput="true" AllowKeyboardInput="true" AllowGamepadInput="true" |
[Debug]
WriteMapData="false" |
Contents
[Video]
Below are the different video options.
Fullscreen
Default: "true"
Whether the game is fullscreen or not. The game will remember if it was fullscreen or not the last time you ran it (even if you didn't use the video config menu,) and will make it that way again when you run it again.
Window_Width, Window_Height
Default: Window_Width="1280" Window_Height="720"
When the game is not fullscreen, this is the size that the game was the last time it ran. This size will be restored the next time it's run.
VSync
Default: "true"
VSync is used to get rid of vertical tearing. It can cause a performance hit, but that hit will only really affect older machines. It is best left on.
AntiAliasing
Default: "0"
There are 4 possible values to this: 0
, 2
, 4
, and 8
. This will smooth out the lines on polygons, like the ones on the pause menu and dialog boxes, but comes at a great performance cost (even on modern machines.) It's best to leave this at 0, unless your device can support it.
Texture_Interpolation
Default: "true"
This smooths out the pixels when the game is playing at a resolution that's not a solid multiple of 640x360
, such as 1280x720
or 1920x1080
. If you were playing at, say, 1680x1050
then the game would be downscaled some from 1920x1080
and Texture Interpolation will help to smooth out the pixels. Otherwise, you will get a jagged look.
This option also helps to smooth out words on the screen, as well as high-res assets such as character portraits, when they are downscaled. The performance hit on this is very small, so it's best left on.
Upscale_Method
Default: "1"
There are two possible values for this, which are 0
and 1
.
0
will use Integer Scaling, which means that if you're playing the game on a monitor that's 1680x1050
, the game will play at 1280x720
to guarantee that all pixels are double size of the game's base resolution of 640x360
.
1
will use Fractional Scaling, which means that if you're playing on the 1680x1050
screen, the game will render at 1920x1080
which is exactly 3 times the base resolution of 640x360
, and then will downsample it to fit into your display.
It's best to leave this at 1, so that the game will take the maximum amount of space on your screen. However, if your monitor is something like 1366x768
and you're having performance issues or don't like the smoothing, it may be better to set this to 0 to prevent the game from rendering larger than it needs to. This will result in a black bar around the screen, but all pixels will be exactly double size.
AppSurfaceUpscale
Default: "true"
Although Shield Cat has a resolution of 640x360
, it will actually render at your monitor's native resolution. For instance, if your monitor is 1920x1080
, then the game will render at that resolution. All high-res assets, polygons, shaders, and whatnot will be rendered at your screen's native resolution.
However, this can cause negative performance on older machines. In this case, you can disable AppSurfaceUpscale. The game will render all assets, polygons, shaders, and whatnot at 640x360
and then upscale the final result to fit the display. This can have an incredible impact on older machines to make the game run at full speed instead of very slowly. However, if Texture_Interpolation
is on, and AppSurfaceUpscale
is off, then the screen will be blurry. You must turn BOTH of these settings off to correct this issue.